LCD Digital Screen Digital Infrared Thermometer ABS Plastic 0.2degree
| Poduct Name | Handheld Non Contact Forehead Infrared Thermometer With LCD Digital Screen |
| Brand Name | Care4U |
| Model Numbe | ZLK-IRT101 |
| Warranty | 1 year |
| Material | Plastic ABS and electronic component |
| Quality Certification | CE/FDA/ROHS/ISO13485 |
| Instrument classification | Class II |
| Power suplier | 2*1.5V AAA Batteries |
| Power | Removable Battery |
| Display | LCD Screen |
| Measuring distance | 3-5cm(recommend distance) |
| Sound | Buzzer, 30 DB , Switch control |
| Measuring range | Body:,89~109°F/32~42°C Object:32~212°F/0~100°C |
| Operating ambient temperature | 50~104°F/10~40°C |
| Operating ambient humidity | Less than or equal to 80%RH |
| Storage temperature range | -13~-131°F/-25~-55°C |
Packing
Unit Size:170*116*55mm
Net Weight:150g(without batteries)
Carton Size:605*360*295mm 50pcs/carton
Carton Weight:8.65kg
How to use it?
1.Switch between body and object temperature mode
when in measurement mode,press the “SET”key to switch between the object temperature measurement mode(the display shows a small house) and the human body temperature measurement mode(the display shows the child's smiling face)
- Look up the measured historical data
In the shutdown state,press the “MEMO” key to view the last first measured data,and press it again to view the last second data.The thermometer can store 32 sets of data measured in the human body temperature measurement mode.Press the “POW”key to exit the look up.
- Set parameters of the themometer
In the shutdown state,press and hold the “SET”key to 3 seconds until the screen lights up.in F1 mode,press “MEMO” to select on or off.Press “POW” to exit the setting.
- Set the temperature abnormal alarm threshold
In F1 mode,lightly press “SET” button to enter F2 mode,in this state,press “MEMO” button to set the temperature.Press “POW” to exit the setting.
- Set temperature compensation
In F2 mode,lightly press “SET” button to enter F3 mode,
press press “MEMO” button to set the temperature compensation.This operation is more professional,it is recommended to keep the factory default settings and set the value to zero.Press “POW” to exit the setting.
- Switch between Celsius/Fahrenheit temperature units
In F3 mode,lightly press “SET” button to enter F4 mode,press
“MEMO” key to set the temperature unit(Celsius/Fahrenheit switching selection).
FAQ
Q1:The device is on (the screen is measured),but the temperature cannot be measured.
A1:Confirm whether the product enters the measurement data viewing mode or parameter setting mode.If you under this mode,please press the power button(POW key) to shut down(or wait 1 minute to automatically shut down),and then press the temperature measurement key after rebooting.
Q2:The temperature measurement is obviously too low
A2:Confirm whether the device is under the object temperature measurement mode.If so,press the SET key once to enter the human body temperature measurement mode.Enter the parameter setting mode and check whether the temperature compensation setting is negative.It is recommended to set the value to 0.
Q3:The measurement temperature is obviously too high
A3:Enter the parameter setting mode and check whether the temperature compensation setting is positive.It is recommended to set the value to 0.
Product Tags:
|
|
LCD Digital Screen Digital Infrared Thermometer ABS Plastic 0.2degree Images
|
